The company Bose is leading manufacturer of a wide range of quality speakers. There are used in both professional and for commercial purpose. The company also manufactures quality outdoor speakers and these speakers are able to withstand any weather condition. We have to make sure that the speakers are placed or installed in a good position so that they operate safely and also produce a quality output.
The first thing is to find out the position where we are going to place the speakers. We have to find out the place where they have to be placed. Mostly the speakers are to be placed in a encircle form. This would be advisable for the places such as garden. This position of the speakers enables a good transmission of sound between the speakers and this enables a good listening. If you’re looking for new speakers, check out Nintronics.
Before we assemble the speakers we have to get ready with the tools that are required for that purpose. Some of the tools required are wire strippers and screwdrivers. We must also have speaker wires in large quantity for the installation in outdoor purpose. We can refer the manual in case of any doubt arising.
- The first thing is to place the speakers in their appropriate position. We must make sure that they are placed securely. This has to be done on extreme care in case when we mount the speakers on a higher ground.
- The next thing is that we have to get ready with the speaker wires. The speaker wires are bounded together with each other and are covered with insulation. First we have to separate the wires from each other for small distance. Then we have to remove the upper insulation for half an inch. This can be done with the help of stripper tool.
- We first have to introduce connection between the wire and to the audio source before connecting it to speaker. We have to check the receiver’s back for outputs. They should say (R) for right and (L) for left. The both speakers have positive and negative terminal. The positive terminal has screws which are red in color and the left speaker has screws which are black in color. We must loosen these screws using the screwdriver. After removing these screws we can insert the wires in the holes. We then have to insert the screw and tighten it up.
- The next step is to connect the wires with the speakers at the outdoor. The speakers also have the positive and negative terminals with screws of respective colors as said earlier. We have to remove the screws using the screwdriver and insert the wires in the holes and tighten the screw to it. We must note that we have to insert the same color wire in right terminals of both receiver and the speaker, Check out our list of free and paid vocal plugins.
- The same procedure has to be done on both the speakers. The most important thing we have to keep in mind is that we must switch off the devices before we handle them in order to avoid any accidents.
